Sterilisation - Formaldehyde/MVI and EO

Formaldehyde Control Indicators
Low temperature process when high temperature steam cannot be used
Ref: 2401
Formaldehyde Control Indicators – 100 indicators/box
Conforms to ISO 11140-1 Class 4
Formaldehyde Control Indicators should be used inside each pack to show that Low Temperature Steam and formaldehyde gas (LTSF) has penetrated the pack in a sufficient quantity and for the correct length of time for sterilisation to occur.

Formaldehyde Process Detector Spots
Low temperature process when high temperature steam cannot be used
Ref: 2402
Formaldehyde Process Detector Spots – 250 spots/box
Conforms to ISO 11140-1 Class 1
The self adhesive spots should be placed on the outside of every pack being sterilised. The spots change colour after passing through the process allowing differentiation between processed and unprocessed loads.

MVI Ethylene
Oxide Indicator
Lead Free and non-toxic, this advanced ink technology is both safe to use and environmentally friendly
Ref: 2563
MVI Ethylene Oxide Indicator – 250 indicators/box
Conforms to ISO 11140-1 Class 4
When placed inside trays, packs or pouches, MVI Ethylene Oxide Indicators will confirm that the gas has penetrated to the point of placement.

MVI Steam Indicator
Made without lead and non-toxic, this patented* ink technology is both safe to use and environmentally friendly – white to black colour change
Ref: 2551
MVI Steam Indicator – 240
indicators/box
Conforms to ISO 11140-1 Class 4
When placed inside trays, packs or pouches, MVI Steam Indicators will confirm that steam has penetrated to the point of placement.

Vapour Strip
Advanced ink technology that is both safe to use and environmentally friendly
Ref: 2501
Vapour Strip – 200 indicators/box. Conforms to ISO 11140-1 Class 4
The Vapour Strip is intended for use by healthcare providers for the monitoring of the STERRAD® Sterilisation System. The Vapour Strip is validated for use in STERRAD® NX and STERRAD® 100S sterilisers. When placed inside trays, packs or pouches, the vapour strip will confirm that sterilant has penetrated to the point of placement. STERRAD® is a registered trademark of Advanced Sterilisation products, Division of Ethicon Inc., a Johnson & Johnson company.

Ethylene Oxide Integrators
For use in Ethylene Oxide Sterilisers
Ref: 2420
Ethylene Oxide Integrators – 100 indicators/box
Conforms to ISO 11140-1 Class 5
Ethylene Oxide Integrators should be placed inside each pack.
The control indicator turns from red to green when adequate sterilising conditions have been reached, giving the end-user assurance that adequate sterilising conditions occurred at point of placement.

Ethylene Oxide Spots
For use in Ethylene Oxide Sterilisers
Ref: 2421
Ethylene Oxide Spots –
1000 spots/box
Conforms to ISO 11140-1 Class 1
The self adhesive spots should be placed on the outside of every pack being sterilised. The spots change colour after passing through the process allowing differentiation between processed and unprocessed loads.
MAKE AN ENQUIRY
Fill in the following form to send a message to us.